- Innovative one-mile range training collar delivers proprietary low-level, “blunt” stimulation to quickly, safely and effectively condition your pup’s behavior.
- Features “lock and set” stimulation levels from 1 to 100, and a boost level from 1 to 60, to match your individual dog’s temperament; 4-ounce receiver is suitable for any dog over 20 pounds.
- Unit also sends tapping vibration and tone stimulation; nighttime tracking light improves low light visibility and helps distinguish between dogs when using a two-dog system.
- Collar is made of patented BioThane–a unique polyester webbing covered with a polymer coating that is highly durable, waterproof and easy to clean; can be cut to fit without fraying.
- Waterproof transmitter with intuitive “no-look” button layout lets you keep your eyes on your dog; proudly assembled in Garrett, Indiana, and available as a one or two-dog system.
Train your beloved pooch safely, effectively and efficiently with the Educator By E-Collar Technologies The Boss 1 Mile Range Remote Dog Training Collar. This innovative training device uses a proprietary low-level, blunt electronic stimulation to humanely condition your best friend to obey without the need for high levels of potentially harmful corrective stimulus. Other unique features include “lock and set” stimulation levels from 1 to 100, and the ability to set a boost level from 1 to 60, so you can tailor the level to your dog’s behavior. When higher levels of correction are needed, this collar features one of Educator’s highest stimulation levels. It also features a vibration mode that can be activated with a simple tap of a button, as well as a night tracking light for increased visibility and easy designation when using a two-dog system.
| Item Number | 139861 |
|---|---|
| Range of Coverage | 1 Mile |
| Estimated Battery Life | Remote – 24 – 72 hours; Collar – 24 – 72 hours |
| Lifestage | All Lifestages, Adult |
| Breed Size | All Breeds |
| Closure Type | Buckle |
| Collar Type | Remote Training – Tone, Remote Training – Vibration, Remote Training – Static |
| Features | Waterproof |
| Material | Plastic, Nylon, Synthetic Fabric |
| Recommended Pet Weight | Over 20 pounds |
| Recommended Pet Age | 6 months and up |
| Compatibility | Battery Powered, Rechargeable |
(1) Waterproof Collar Receiver, (1) Waterproof Floating Remote, (1) 1″ x 30″ Biothane Collars (Ready to Be Cut to Size), (2) Sets of Contact Points (1/2″ and 3/4″), (1) Contact Point Removal Tool, (1) Tri Battery Charger (120V/220V), (1) Owner’s Manual with Training Tips, (1) Lanyard for the Remote, (1) Quick Release Belt-Clip, (1) Deluxe Plastic Carrying Case
This product is intended to be used on DOGS ONLY.
Important:Â To prevent the occurrence of skin irritations, the collar receiver should never be worn for more than 12 hours per day. Should your dog experience skin irritations from overexposure to the contact points, remove the collar receiver unit immediately and stop using your e-collar until all skin irritations are completely healed.
E-Collars can be used to reinforce commands your dog already knows or as a training tool when paired with leash pressure. It is not a replacement for basic leash obedience training, but a tool to allow you to better communicate with your dog.
For best results, use the least amount of stimulation required to get the attention of your dog. A calm and consistent approach to training will always produce better long-term results.
It is highly recommended that aggressive dogs be taken to a professional trainer for evaluation before e-collar use.
We recommend first time users to immerse themselves in learning about the proper techniques or seek a professional e-collar trainer.
Do not allow the batteries to get hot or be fully discharged long-term store at room temperature and 50% capacity charge.
My receiver/transmitter is not turning on. Make sure the collar receiver is fully charged. Collar receiver light should turn green when fully charged while connected to the charger.
My receiver is not responding. Check the receiver’s indicator light is blinking green and transmitter LCD is on. Check to make sure the collar receiver’s indicator light is red when the stimulation button is pressed. Also, try pairing/syncing the transmitter to the receiver.
The receiver doesn’t seem to provide stimulation to the dog. Remove contact points from the receiver. Connect the Test Light to the receiver and test for stimulation. If the test light is blinking, the receiver is providing stimulation.
Max range of device has been decreased. Check the transmitter’s battery condition. Working range decreases when the battery level is low.
You cannot change the stimulation level for the remote. Make sure the 1D or 2D on transmitter LCD is blinking. If 1D or 2D icons are solid, you cannot change stimulation. You can unlock the stimulation at any time by pressing the stimulation knob for 1 second.
| Size | Neck Size | Collar Width | Recommended Pet Weight |
|---|---|---|---|
| One-Size | Up to 30 inches | 1 inch | Over 20 lbs |
*This collar can be cut to size.
Yes, the ET-800 Remote E-Collar, aka “The Boss” is one of the top working dog collar trainers. The ET-800 Remote E-Collar utilizes the proprietary “blunt stimulation” for superior results for low-level stimulation work. However, when high stimulation is needed, the ET-800 Remote E-Collar receiver has the highest stimulation of all the remote trainers in the full dog remote collar market.
Educator includes a 2 year warranty with this item upon purchase
Reviews
There are no reviews yet.